STXB Upblast Centrifugal Roof Exhaust 24 inch 4555 CFM Belt Drive STXB24RHULPH1S
Highly Recommended Items:
Available on sizes 8-22, The Automatic Belt Tensioners eliminate the need for regular manual retensioning of drives, and the risk of inadvertently over-tensioning drive components is avoided and overall drive operating efficiency is enhanced. Benefits include reduction in startup and maintenance costs, increased belt life, increased drive efficiency, and ensure drive components do not snag obstructions.
**Can withstand ambient temperatures up to 300F**
We designed these fans so you can use smaller models and motors to meet the performance needed. With our new centrifugal spun aluminum line we are able to deliver wider performance ranges and unit sizes. The charts below show sample comparisons of the SDB and STXB vs. common competitors and the old DB and TXBs. These charts show at the most common static pressure points of these models (.25 to 1”) the new SDB and STXB have more CFM/BHP. This means you can:
• Save $ by using less energy to meet the same performance as the competitor.
• Save $ by choosing the smallest motor to get the job done
CONSTRUCTION:
Housing:
Curb cap with integral deep single piece spun inlet for efficient performance and prevention of leakage into ductwork.
Heavy-gauge aluminum housing and curb cap for strength and rigidity. Curb cap is galvanized steel on all UL762 units.
Stainless steel exterior fasteners.
Enclosed, ventilated motor compartment isolates motor from exhaust air. Neoprene isolators for reduction of vibration and sound.
Quick-Release latches on motor cover for easy access to motor compartment.
Water-tight conduit tube for easy electrical connection without having to wire through the breather tube.
NFPA - Model STXD is suitable for National Fire Protection Association installations. Contact factory for required accessories.
Centrifugal Wheel
All aluminum wheel.
Backward-inclined for efficiency at higher static pressure.
Non-overloading for safe operation in ducted systems.
Curved blades for efficiency and quiet operation.
Dynamically balanced for smooth operation.
Motors
Brands are nationally recognized and locally serviced.
Standard motors are single speed, speed controllable and drip-proof.
All motors are rated for continuous duty.
Disconnect switch is standard with drip-proof motors.
Heavy-gauge steel motor brackets designed for maximum strength.
Drives
Sized for minimum 150% of drive horse power.
Machined cast iron adjustable motor pulleys.
Adjustable base for belt tensioning.
Nonstatic oil resistant V-Belts.
Bearings
5 year bearing warranty.
Heavy-duty ball bearing type.
Air handling with grease fittings.
Sized for a minimum L50 life in excess of 200,000 hours.
DIMENSIONAL DATA
A = 36 inches
B = 49-1/8 inches
C = 50-1/2 inches
D = 37-1/2 inches
Roof Opening = 31-1/2 inches
Curb O.D. = 34-1/2 inches
- Model No.:
- STXB24RHULPH1S
- Voltage:
- 115
- Warehouse:
- Florida
- Made In U.S.A.:
- Yes
- Type:
- Exhaust Fans
- Amps:
- 7.2
- Blade Size (Inches):
- 24
- CFM High:
- 4555
- Dimension Inches:
- Width: 36" Depth: 36" Height: 49-1/8"
- Hertz:
- 60
- Drive Type:
- Belt
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- ODP
- RPM High:
- 495
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 337
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:

QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.